Design and Fabrication of a Magnetic Stirrer for Bio-Diesel Production

Main Article Content

Sule Salisu


As an after effect of expanding vitality request and the contamination issues brought about by the utilization of non-sustainable power source, for example, petroleum products, the utilized of vegetable oils and their subordinates as option for diesel fuel is important. The utilization of biodiesel as a substitute for ordinary vitality source is of incredible ecological and affordable worth. Is in this intrigue, this examination work titled plan and manufacture of an attractive stirrer for bio-diesel creation was done. The accompanying materials and hardware which incorporate; PVC versatile box, glass piece, mix bar, neodymium magnet, 12V DC rotor, potentiometer, switch, AC female connector port, AC connector, DC to DC support converter, LM317, Vero board, and hardware wire were utilized in this examination work. The framework comprises of significantly three basic units which incorporate controller unit, yield unit and force unit. The controller unit comprises of a movable straight controller IC (LM317) which gets the voltage (12V DC) and fluctuates it between 10V DC and 12V DC that forms it and sends the voltage to the yield unit. The yield unit comprises significantly of our rotor installed with magnets and a warmer. The force unit comprises of an AC connector intended to change over 220V AC to 5V DC, 1A. The attractive stirrer was created and the aftereffects of execution test did indicated that the genuine force in the stirrer was 6.25 watts. Also, a torque of 353.16 N, an effectiveness of 56.8%, an expected time required for complete response of the framework was 7 hours (25200 seconds), the force contribution to attractive stirrer was 11 watts, and the net vitality conveyed during 7 hours was 277.2 KJ. With an effectiveness of 56.8% acquired, the exhibition of the created attractive stirrer is palatable.

Article Details