Comparative Study of Phenol-Based Oxidative Discoloration in Natural Rubber Properties
Abstract
Natural rubber is an important industrial biopolymer widely used in the
manufacture of tyres, medical products, and engineering materials due to its
excellent elasticity and mechanical strength. However, oxidative discoloration
caused by naturally occurring phenolic compounds in latex can influence the
quality and stability of raw rubber during processing and storage. This study
investigated the effect of phenol-based oxidative discoloration on selected
physicochemical properties of natural rubber obtained from Hevea brasiliensis
latex. Fresh latex samples were collected from the Rubber Research Institute,
Benin City, Nigeria, and analyzed using standard ISO procedures. The evaluated
parameters included dirt content, volatile matter, ash content, nitrogen content,
initial plasticity (P₀), plasticity after ageing (P₃₀), and plasticity retention index
(PRI). The results showed that dirt content ranged from 0.02–0.04%, volatile
matter from 0.60–0.67%, ash content from 0.22–0.24%, and nitrogen content from
0.22–0.24%. The P₀ values ranged between 51–56, while P₃₀ values ranged from
43–47. PRI values ranged from 78–82%, indicating good oxidative stability of the
rubber samples. Samples affected by oxidative discoloration showed slightly
higher volatile matter and lower PRI values compared to the control sample,
suggesting minor reductions in thermal and oxidative stability due to phenolic
oxidation reactions. Despite these variations, all samples remained within
acceptable industrial standards for technically specified natural rubber. The study
concludes that phenol-based oxidative discoloration exerts only minimal influence
on the overall physicochemical quality of natural rubber, although slight
reductions in oxidative stability may occur. The findings provide useful
information for improving quality control, storage, and processing conditions in
natural rubber production.